



Network Inventory YANG                                        B. Wu, Ed.
Internet-Draft                                                    Huawei
Intended status: Standards Track                            M. Boucadair
Expires: 20 November 2026                                         Orange
                                                                 C. Zhou
                                                            China Mobile
                                                                   Q. Wu
                                                                  Huawei
                                                             19 May 2026


        A YANG Network Data Model for Inventory Topology Mapping
              draft-ietf-ivy-network-inventory-topology-07

Abstract

   This document defines a YANG data model that extends the network
   topology data model (RFC 8345) to map network topologies with
   inventories.  The data model introduces the "inventory-topology"
   network type and augmentations for physical entity mappings and
   capabilities, which may be used by any overlay network topology for
   service provisioning validation, network maintenance, and capacity
   planning.

Discussion Venues

   This note is to be removed before publishing as an RFC.

   Discussion of this document takes place on the Network Inventory YANG
   Working Group mailing list (inventory-yang@ietf.org), which is
   archived at https://mailarchive.ietf.org/arch/browse/inventory-yang/.

   Source for this draft and an issue tracker can be found at
   https://github.com/ietf-ivy-wg/network-inventory-topology.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.







Wu, et al.              Expires 20 November 2026                [Page 1]

Internet-Draft         Inventory Topology Mapping               May 2026


   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 20 November 2026.

Copyright Notice

   Copyright (c) 2026 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Editorial Note (To be removed by RFC Editor)  . . . . . .   3
   2.  Conventions and Definitions . . . . . . . . . . . . . . . . .   3
   3.  Sample Use Cases of the Data Model  . . . . . . . . . . . . .   4
     3.1.  Determine Available Resources of Service Attachment Points
           (SAPs)  . . . . . . . . . . . . . . . . . . . . . . . . .   4
     3.2.  "What-if" Scenarios . . . . . . . . . . . . . . . . . . .   5
   4.  Module Tree Structure . . . . . . . . . . . . . . . . . . . .   5
     4.1.  Link Extensions . . . . . . . . . . . . . . . . . . . . .   6
     4.2.  Port-Breakout Capability  . . . . . . . . . . . . . . . .   7
   5.  Network Inventory Topology YANG Module  . . . . . . . . . . .   7
   6.  Operational Considerations  . . . . . . . . . . . . . . . . .  13
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  13
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  14
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  15
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  15
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  15
   Appendix A.  'link-type' Usage Examples . . . . . . . . . . . . .  17
   Appendix B.  JSON Example of an Multi-fibre Push On (MPO)
           Breakout-Channel Port . . . . . . . . . . . . . . . . . .  19
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  20
   Contributors  . . . . . . . . . . . . . . . . . . . . . . . . . .  20
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  21





Wu, et al.              Expires 20 November 2026                [Page 2]

Internet-Draft         Inventory Topology Mapping               May 2026


1.  Introduction

   [I-D.ietf-ivy-network-inventory-yang] defines the base network
   inventory model to aggregate the inventory data of Network Elements
   (NEs).  This data includes identification of these NEs and their
   hardware, firmware, and software components.  Examples of inventory
   hardware components could be rack, shelf, slot, board, or physical
   port.  Examples of inventory software components could be platform
   Operating System (OS), software-modules, bios, or boot-loader
   [I-D.ietf-ivy-network-inventory-software].

   In order to ease navigation between inventory and network topologies,
   this document extends the network topology data model [RFC8345] for
   network inventory mapping: "ietf-network-inventory-topology"
   (Section 5).  This data model provides a mechanism for the
   correlation with existing network and topology data models, such as
   "A YANG Network Data Model for Service Attachment Points (SAPs)"
   [RFC9408], "A YANG Data Model for Layer 2 Network Topologies"
   [RFC8944], and "A YANG Data Model for Layer 3 Topologies" [RFC8346].

   Similar to the base inventory data model
   [I-D.ietf-ivy-network-inventory-yang], the network inventory topology
   does not make any assumption about involved NEs and their roles in
   topologies.  As such, the mapping data model can be applied
   independent of the network type (optical local loops, access network,
   core network, etc.) and application.

1.1.  Editorial Note (To be removed by RFC Editor)

      Note to the RFC Editor: This section is to be removed prior to
      publication.

   This document contains placeholder values that need to be replaced
   with finalized values at the time of publication.  This note
   summarizes all of the substitutions that are needed.

   Please apply the following replacements:

   *  XXXX --> the assigned RFC number for this I-D

   *  AAAA --> the assigned RFC number for
      [I-D.ietf-ivy-network-inventory-yang]

2.  Conventions and Definitions

   The meanings of the symbols in the YANG tree diagrams are defined in
   [RFC8340].




Wu, et al.              Expires 20 November 2026                [Page 3]

Internet-Draft         Inventory Topology Mapping               May 2026


   This document uses terms defined in
   [I-D.ietf-ivy-network-inventory-yang].

   The document adheres to the folding conventions in [RFC8792].

3.  Sample Use Cases of the Data Model

3.1.  Determine Available Resources of Service Attachment Points (SAPs)

   The inventory topology data model correlates underlay physical
   resource information with the SAP network data model [RFC9408].
   While the SAP data model provides the provider network view with the
   points from which services can be attached, the inventory topology
   model maps those SAPs to their underlying physical ports, enabling
   the orchestrator to verify whether a candidate SAP has sufficient
   physical capacity.

   Figure 1 illustrates the query interactions.  During service
   provisioning, the orchestrator can issue a query using the SAP data
   model (e.g., obtaining a list of SAPs across multiple PEs as shown in
   Appendix A of [RFC9408]), and then uses the inventory topology data
   model to check the physical resources of the candidate SAPs.
   Specifically, the "parent-termination-point" of a SAP is mapped to
   the corresponding "port-component-ref" in the inventory topology,
   allowing the orchestrator to verify port availability and capacity.

   If the physical port underlying a candidate SAP has insufficient
   resources (e.g., port speed fully utilized), the orchestrator can
   select an alternate SAP that maps to a different port with adequate
   capacity.  If no alternative SAP is available, the orchestrator flags
   the request for manual intervention, providing the operator with
   precise inventory information about the bottleneck (e.g., "Port
   GE0/6/1 on NE-PE1 is at 95% utilization").  The resource constraint
   can also feed into a "what-if" analysis (see Section 3.2) to evaluate
   hardware upgrades or alternative underlay paths.
















Wu, et al.              Expires 20 November 2026                [Page 4]

Internet-Draft         Inventory Topology Mapping               May 2026


                        .-----------------.
                        |     Customer    |
                        '--------+--------'
        Customer Service request |
           (e.g., L3SM and L2SM) v
                        .--------+--------.
                        |    Service      |
                        |  Orchestration  |
                        '------+---+------'
               (1a) Query SAPs |   | (1b) Verify physical
          via SAP Data Model   v   v capacity via Inventory Topology
                        .------+---+------.
                        |     Network     |
                        |   Controller    |
                        '--------+--------'
                                 |
           .---------------------+---------------------.
           |                  Network                  |
           '-------------------------------------------'

          Figure 1: An Example Usage of Network Inventory Topology

3.2.  "What-if" Scenarios

   [I-D.irtf-nmrg-network-digital-twin-arch] defines Network Digital
   Twin (NDT) as a virtual representation of the physical network.  Such
   representation is meant to be used to analyze, diagnose, emulate, and
   then manage the physical network based on data, models, and
   interfaces.

   [I-D.ietf-nmop-simap-concept] defines Service and Infrastructure Maps
   (SIMAP) as an abstraction model that provides a unified view of both
   service and infrastructure information, enabling correlation between
   service requirements and underlying resource capabilities.

   Both architectures require accurate mapping between logical network
   topology and physical inventory as a foundational data layer.  This
   model provides the essential physical resource information to such
   systems, enabling them to perform accurate "what-if" analysis (e.g.,
   impact prediction of hardware End-of-Life, path re-optimization under
   resource constraints, service availability assessment).

4.  Module Tree Structure

   An overview of the structure of the "ietf-network-inventory-topology"
   module is shown in Figure 2.





Wu, et al.              Expires 20 November 2026                [Page 5]

Internet-Draft         Inventory Topology Mapping               May 2026


      module: ietf-network-inventory-topology

        augment /nw:networks/nw:network/nw:network-types:
          +--rw inventory-topology!
        augment /nw:networks/nw:network/nw:node:
          +--rw inventory-mapping-attributes
             +--rw ne-ref?   nwi:ne-ref
        augment /nw:networks/nw:network/nt:link:
          +--rw inventory-mapping-attributes
             +--rw link-type?   identityref
        augment /nw:networks/nw:network/nw:node/nt:termination-point:
          +--rw inventory-mapping-attributes
          |  +--rw ne-ref?     nwi:ne-ref
          |  +--rw port-ref?   leafref
          +--ro port-breakout!
             +--ro breakout-channel* [channel-id]
                +--ro channel-id    uint16

    Figure 2: The Structure of the Network Inventory Mapping Data Model

   The module augments the "ietf-network-topology" module as follows:

   Inventory mapping attributes for nodes, and termination points:  The
      corresponding containers augments the topology module with the
      references to the base network inventory

4.1.  Link Extensions

   This document adds a lightweight "link-type" leaf to the topology
   link mapping to enable basic physical media classification.

   "link-type":  An identityref indicating the link media type.

      Examples of wired link types are "copper", "fiber", or "coax".
      For wireless media, values such as "microwave", or "wlan" may be
      used.  See also [RFC9656] for more detailed microwave radio
      attributes.

      The "link-type" serves as a lightweight discriminator that guides
      to the appropriate specialized inventory model for detailed
      resource information.  For example, wired media ("fiber" or
      "copper") typically references a passive network inventory model
      such as the one defined in
      [I-D.ygb-ivy-passive-network-inventory].







Wu, et al.              Expires 20 November 2026                [Page 6]

Internet-Draft         Inventory Topology Mapping               May 2026


4.2.  Port-Breakout Capability

   High-density Ethernet ports (e.g., 400 Gb/s DR4) can be split into
   multiple independent lower-speed channels.  The breakout channels
   represent the intrinsic capability of the port to be partitioned,
   regardless of whether the port is currently configured as a trunk or
   as a breakout port.

   A trunk port is associated with exactly one physical interface.  A
   breakout port is a port that is decomposed into two or more physical
   interfaces; those interfaces may run at the same or different speeds
   and may consume the same or a different number of breakout channels.

   The container "port-breakout" is added under the termination-point
   augmentation.  It lists the logical channels into which the single
   physical port can be divided.  Only termination-points whose parent
   port is breakout-capable need to instantiate the container; otherwise
   the container is omitted, keeping the topology model minimal for the
   common non-breakout case.

   Breakout channel is an atomic resource element obtained by
   partitioning a breakout port.  One physical interface may be
   associated with one or more breakout channels, but one breakout
   channel MUST NOT be associated with more than one physical interface.
   Appendix B provides example configurations.

   It is assumed that a port which supports breakout can be configured
   either as a trunk port or as a breakout port.  Interface
   channelisation (e.g., VLAN sub-interfaces) is outside the scope of
   this document and is addressed by the Layer 2 network topology model
   [RFC8944].

5.  Network Inventory Topology YANG Module

   This module augments the Network Topology module defined in
   [RFC8345].

   This module imports the base network inventory
   [I-D.ietf-ivy-network-inventory-yang].

   <CODE BEGINS> file "ietf-network-inventory-topology@2026-05-19.yang"
   module ietf-network-inventory-topology {
     yang-version 1.1;
     namespace
       "urn:ietf:params:xml:ns:yang:ietf-network-inventory-topology";
     prefix nwit;

     import ietf-network {



Wu, et al.              Expires 20 November 2026                [Page 7]

Internet-Draft         Inventory Topology Mapping               May 2026


       prefix nw;
       reference
         "RFC 8345: A YANG Data Model for Network Topologies,
                    Section 4.1";
     }
     import ietf-network-topology {
       prefix nt;
       reference
         "RFC 8345: A YANG Data Model for Network Topologies,
                    Section 4.2";
     }
     import ietf-network-inventory {
       prefix nwi;
       reference
         "RFC AAAA: A YANG Data Model for Network Inventory";
     }

     organization
       "IETF Network Inventory YANG (ivy) Working Group";
     contact
       "WG Web:   <https://datatracker.ietf.org/wg/ivy>
        WG List:  IVY <mailto:inventory-yang@ietf.org>

        Editor: Bo Wu
                <lana.wubo@huawei.com>
        Editor: Mohamed Boucadair
                <mohamed.boucadair@orange.com>
        Author: Cheng Zhou
                <zhouchengyjy@chinamobile.com>
        Author: Qin Wu
                <bill.wu@huawei.com>";
     description
       "This YANG module defines a YANG module for network
        topology and inventory mapping.

        Copyright (c) 2026 IETF Trust and the persons identified
        as authors of the code. All rights reserved.

        Redistribution and use in source and binary forms, with
        or without modification, is permitted pursuant to, and
        subject to the license terms contained in, the Revised
        BSD License set forth in Section 4.c of the IETF Trust's
        Legal Provisions Relating to IETF Documents
        (https://trustee.ietf.org/license-info).

        All revisions of IETF and IANA published modules can be found
        at the YANG Parameters registry group
        (https://www.iana.org/assignments/yang-parameters).



Wu, et al.              Expires 20 November 2026                [Page 8]

Internet-Draft         Inventory Topology Mapping               May 2026


        This version of this YANG module is part of RFC XXXX; see
        the RFC itself for full legal notices.";

     revision 2026-05-19 {
       description
         "Initial revision.";
       reference
         "RFC XXXX: A Network Data Model for Inventory Topology
                    Mapping";
     }

     identity link-type {
       description
         "Base identity for classifying the physical media type of a
          link at the inventory topology layer.  Specialized inventory
          models are expected to define derived identities for specific
          media, e.g., fiber, copper, or wireless.";
     }

     identity copper {
       base link-type;
       description
         "Copper-based physical link.";
     }

     identity fiber {
       base link-type;
       description
         "Fiber-based physical link.";
     }

     identity coax {
       base link-type;
       description
         "Coaxial cable-based physical link.";
     }

     identity microwave {
       base link-type;
       description
         "Microwave-based wireless link.
          Detailed microwave radio attributes are defined in the
          microwave topology data model.";
       reference
         "RFC 9656: A YANG Data Model for Microwave Topology";
     }

     identity wlan {



Wu, et al.              Expires 20 November 2026                [Page 9]

Internet-Draft         Inventory Topology Mapping               May 2026


       base link-type;
       description
         "IEEE 802.11 wireless link.";
     }

     identity unknown {
       base link-type;
       description
         "The link media type is unknown or could not be determined.
          This identity is used as a fallback when the physical medium
          cannot be classified into any of the other defined types.";
     }

     identity leased-fiber {
       base fiber;
       description
         "Leased fiber link.  The physical medium is fiber, but the link
          is provided by a third-party operator.  Detailed physical
          attributes are typically not visible to the lessee.";
     }

     // Main blocks

     augment "/nw:networks/nw:network/nw:network-types" {
       description
         "Introduces a new network type for inventory topology
          mapping.";
       container inventory-topology {
         presence
           "Indicates this is a bottom-most physical topology instance,
            containing physical-layer attributes including inventory
            mapping, port breakout capabilities, and link media types.";
         description
           "Container for the inventory-topology network type.
            When present, it signals that the network contains
            physical-layer augmentations as defined in this module.
            This network type is intended to serve as the underlay
            for logical network topologies (Layer 2, Layer 3,
            Traffic Engineering (TE), etc.).";
       }
     }

     augment "/nw:networks/nw:network/nw:node" {
       when '../nw:network-types/nwit:inventory-topology';
       description
         "Augments the network topology node with inventory mapping
          attributes. This enables correlation between the logical node
          and its physical network element.";



Wu, et al.              Expires 20 November 2026               [Page 10]

Internet-Draft         Inventory Topology Mapping               May 2026


       container inventory-mapping-attributes {
         description
           "Container for inventory mapping attributes of a node.";
         leaf ne-ref {
           type nwi:ne-ref;
           description
             "Reference to the NE in the inventory that corresponds to
              this topology node.

              This reference establishes a 1:1 mapping between the
              logical node and its physical NE.";
         }
       }
     }

     augment "/nw:networks/nw:network/nt:link" {
       when '../nw:network-types/nwit:inventory-topology';
       description
         "Augments the network topology link with inventory-related
          attributes.";
       container inventory-mapping-attributes {
         description
           "Container for inventory-related attributes of a link.

            This container provides lightweight media classification.
            The link-type indicates which specialized inventory model
            contains detailed resource information:

            - Wired media (fiber, copper): passive network inventory
            - Wireless media (microwave, Wi-Fi): wireless-specific
              inventory

              Detailed inventory references may be added in future
              modules.";
         leaf link-type {
           type identityref {
             base link-type;
           }
           description
             "Classification of the link media type at the topology
              layer.

              The base identity 'link-type' is extensible. Examples
              of derived identities include 'copper', 'fiber',
              'coax', 'microwave', and 'wlan'.

              This leaf serves as a lightweight discriminator.  When
              the value is 'microwave', detailed microwave link



Wu, et al.              Expires 20 November 2026               [Page 11]

Internet-Draft         Inventory Topology Mapping               May 2026


              attributes are defined in the microwave topology data
              model. Wired media (e.g., fiber, copper, or coax) may
              be detailed in a passive network inventory data
              model.";
         }
       }
     }

     augment "/nw:networks/nw:network/nw:node/nt:termination-point" {
       when '../../nw:network-types/nwit:inventory-topology';
       description
         "Augments the TP with inventory mapping and port breakout.";
       container inventory-mapping-attributes {
         description
           "Container for inventory mapping attributes of a TP.";
         uses nwi:port-ref {
           refine "port-ref" {
             description
               "Reference to the physical port component in the
                network inventory. This reference establishes a 1:1
                mapping between the logical TP and its physical port
                component.";
           }
         }
       }
       // breakout channels (lightweight, per physical port)
       container port-breakout {
         presence "Indicates the port supports channel breakout.";
         config false;
         description
           "Breakout capability of the physical port represented by
            this TP. One TP maps to one physical port; channels are
            listed here. This container is present only when the
            underlying hardware supports partitioning the port into
            multiple independent channels (e.g., 400G to 4x100G).";
         list breakout-channel {
           key "channel-id";
           description
             "List of breakout channels available on this port.
              Each entry represents an independent lane or sub-port
              that can be used for channelized interfaces.";
           leaf channel-id {
             type uint16;
             description
               "Unique identifier for the breakout channel within the
                scope of the parent port.";
           }
         } // breakout-channel



Wu, et al.              Expires 20 November 2026               [Page 12]

Internet-Draft         Inventory Topology Mapping               May 2026


       } // port-breakout
     }
   }
   <CODE ENDS>

6.  Operational Considerations

   This model enables a network controller to report discovered network
   topology and inventory information.  Automatic discovery serves as
   the primary mechanism, with selective configuration capabilities
   provided for scenarios where discovery is not feasible.

   For typical operations such as service provisioning and network
   planning, the model offers read-only query access to authoritative
   mappings between logical topology and physical inventory.  The
   inventory-mapping-attributes containers are defined as read-write
   (config true) to accommodate cases where automatic discovery is not
   possible, including:

   *  Customer-premises equipment (CPE) outside the operator's
      management domain

   *  Leased lines and third-party transport resources

   *  Planned or hypothetical resources for future deployment

   In these cases, the operator manually configures the mapping to
   maintain accurate topology-to-inventory correlation.

   The following nodes are read-only (config false) as they represent
   hardware-determined state:

   port-breakout:  Hardware capability determined by physical port
      characteristics

7.  Security Considerations

   This section is modeled after the template described in Section 3.7.1
   of [RFC9907].

   The "ietf-network-inventory-topology" YANG module defines a data
   model that is designed to be accessed via YANG-based management
   protocols, such as Network Configuration (NETCONF) [RFC6241] and
   RESTCONF [RFC8040].  These YANG-based management (1) have to use a
   secure transport layer (e.g., Secure Shell (SSH) [RFC4252], TLS
   [I-D.ietf-tls-rfc8446bis], and QUIC {{?RFC9000]) and (2) have to use
   mutual authentication.




Wu, et al.              Expires 20 November 2026               [Page 13]

Internet-Draft         Inventory Topology Mapping               May 2026


   The Network Configuration Access Control Model (NACM) [RFC8341]
   provides the means to restrict access for particular NETCONF or
   RESTCONF users to a preconfigured subset of all available NETCONF or
   RESTCONF protocol operations and content.

   There are a number of data nodes defined in this YANG module that are
   writable/creatable/deletable (i.e., "config true", which is the
   default).  All writable data nodes are likely to be sensitive or
   vulnerable in some network environments.  Write operations (e.g.,
   edit-config) and delete operations to these data nodes without proper
   protection or authentication can have a negative effect on network
   operations.  The following subtrees and data nodes have particular
   sensitivities/vulnerabilities:

   'ne-ref', 'port-ref', 'link-type': These nodes are sensitive as they
   establish the mapping between logical topology and physical
   inventory.  Unauthorized modification could lead to incorrect
   resource allocation or service disruption.

   Some of the readable data nodes in this YANG module may be considered
   sensitive or vulnerable in some network environments.  It is thus
   important to control read access (e.g., via get, get-config, or
   notification) to these data nodes.  Specifically, the following
   subtrees and data nodes have particular sensitivities/
   vulnerabilities:

   'ne-ref': The references may be used to track the set of network
   elements.  While read-only, they may reveal network infrastructure
   details.

   'port-breakout': This node exposes hardware capabilities.

8.  IANA Considerations

   IANA is requested to register the following URI in the "ns"
   subregistry within the "IETF XML Registry" [RFC3688]:

      URI:  urn:ietf:params:xml:ns:yang:ietf-network-inventory-topology
      Registrant Contact:  The IESG.
      XML:  N/A; the requested URI is an XML namespace.

   IANA is requested to register the following YANG module in the "YANG
   Module Names" registry [RFC6020] within the "YANG Parameters"
   registry group:







Wu, et al.              Expires 20 November 2026               [Page 14]

Internet-Draft         Inventory Topology Mapping               May 2026


   Name:  ietf-network-inventory-topology
   Maintained by IANA?  N
   Namespace:  urn:ietf:params:xml:ns:yang:ietf-network-inventory-topology
   Prefix:  nwit
   Reference:  RFC XXXX

9.  References

9.1.  Normative References

   [I-D.ietf-ivy-network-inventory-yang]
              Yu, C., Belotti, S., Bouquier, J., Peruzzini, F., and P.
              Bedard, "A Base YANG Data Model for Network Inventory",
              Work in Progress, Internet-Draft, draft-ietf-ivy-network-
              inventory-yang-17, 13 May 2026,
              <https://datatracker.ietf.org/doc/html/draft-ietf-ivy-
              network-inventory-yang-17>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/rfc/rfc3688>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/rfc/rfc6020>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/rfc/rfc8341>.

   [RFC8345]  Clemm, A., Medved, J., Varga, R., Bahadur, N.,
              Ananthakrishnan, H., and X. Liu, "A YANG Data Model for
              Network Topologies", RFC 8345, DOI 10.17487/RFC8345, March
              2018, <https://www.rfc-editor.org/rfc/rfc8345>.

9.2.  Informative References

   [I-D.ietf-ivy-network-inventory-software]
              Wu, B., Zhou, C., Wu, Q., and M. Boucadair, "A YANG
              Network Data Model of Network Inventory Software
              Extensions", Work in Progress, Internet-Draft, draft-ietf-
              ivy-network-inventory-software-03, 15 April 2026,
              <https://datatracker.ietf.org/doc/html/draft-ietf-ivy-
              network-inventory-software-03>.





Wu, et al.              Expires 20 November 2026               [Page 15]

Internet-Draft         Inventory Topology Mapping               May 2026


   [I-D.ietf-nmop-simap-concept]
              Havel, O., Claise, B., de Dios, O. G., and T. Graf,
              "SIMAP: Concept, Requirements, and Use Cases", Work in
              Progress, Internet-Draft, draft-ietf-nmop-simap-concept-
              10, 31 March 2026, <https://datatracker.ietf.org/doc/html/
              draft-ietf-nmop-simap-concept-10>.

   [I-D.ietf-tls-rfc8446bis]
              Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", Work in Progress, Internet-Draft, draft-
              ietf-tls-rfc8446bis-14, 13 September 2025,
              <https://datatracker.ietf.org/doc/html/draft-ietf-tls-
              rfc8446bis-14>.

   [I-D.irtf-nmrg-network-digital-twin-arch]
              Zhou, C., Yang, H., Duan, X., Lopez, D., Pastor, A., Wu,
              Q., Boucadair, M., and C. Jacquenet, "Network Digital
              Twin: Concepts and Reference Architecture", Work in
              Progress, Internet-Draft, draft-irtf-nmrg-network-digital-
              twin-arch-12, 27 February 2026,
              <https://datatracker.ietf.org/doc/html/draft-irtf-nmrg-
              network-digital-twin-arch-12>.

   [I-D.ygb-ivy-passive-network-inventory]
              Guo, A., van caenegem, T., Davis, N., Tilocca, M., and B.
              Peters, "A YANG Data Model for Passive Network Inventory",
              Work in Progress, Internet-Draft, draft-ygb-ivy-passive-
              network-inventory-04, 2 March 2026,
              <https://datatracker.ietf.org/doc/html/draft-ygb-ivy-
              passive-network-inventory-04>.

   [RFC4252]  Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Authentication Protocol", RFC 4252, DOI 10.17487/RFC4252,
              January 2006, <https://www.rfc-editor.org/rfc/rfc4252>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/rfc/rfc6241>.

   [RFC7951]  Lhotka, L., "JSON Encoding of Data Modeled with YANG",
              RFC 7951, DOI 10.17487/RFC7951, August 2016,
              <https://www.rfc-editor.org/rfc/rfc7951>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/rfc/rfc8040>.




Wu, et al.              Expires 20 November 2026               [Page 16]

Internet-Draft         Inventory Topology Mapping               May 2026


   [RFC8340]  Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/rfc/rfc8340>.

   [RFC8346]  Clemm, A., Medved, J., Varga, R., Liu, X.,
              Ananthakrishnan, H., and N. Bahadur, "A YANG Data Model
              for Layer 3 Topologies", RFC 8346, DOI 10.17487/RFC8346,
              March 2018, <https://www.rfc-editor.org/rfc/rfc8346>.

   [RFC8792]  Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
              "Handling Long Lines in Content of Internet-Drafts and
              RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
              <https://www.rfc-editor.org/rfc/rfc8792>.

   [RFC8944]  Dong, J., Wei, X., Wu, Q., Boucadair, M., and A. Liu, "A
              YANG Data Model for Layer 2 Network Topologies", RFC 8944,
              DOI 10.17487/RFC8944, November 2020,
              <https://www.rfc-editor.org/rfc/rfc8944>.

   [RFC9408]  Boucadair, M., Ed., Gonzalez de Dios, O., Barguil, S., Wu,
              Q., and V. Lopez, "A YANG Network Data Model for Service
              Attachment Points (SAPs)", RFC 9408, DOI 10.17487/RFC9408,
              June 2023, <https://www.rfc-editor.org/rfc/rfc9408>.

   [RFC9656]  Mansfield, S., Ed., Ahlberg, J., Ye, M., Li, X., and D.
              Spreafico, "A YANG Data Model for Microwave Topology",
              RFC 9656, DOI 10.17487/RFC9656, September 2024,
              <https://www.rfc-editor.org/rfc/rfc9656>.

   [RFC9907]  Bierman, A., Boucadair, M., Ed., and Q. Wu, "Guidelines
              for Authors and Reviewers of Documents Containing YANG
              Data Models", BCP 216, RFC 9907, DOI 10.17487/RFC9907,
              March 2026, <https://www.rfc-editor.org/rfc/rfc9907>.

Appendix A.  'link-type' Usage Examples

   This appendix provides examples illustrating the usage of the "link-
   type" data node.

   Scenario: Device "SW-1" and device "SW-2" are directly connected by a
   fiber.

   Physical topology:








Wu, et al.              Expires 20 November 2026               [Page 17]

Internet-Draft         Inventory Topology Mapping               May 2026


   .--------.                                    .--------.
   |        |                                    |        |
   |  SW-1  +========= fiber link ===============+  SW-2  |
   |        |                                    |        |
   '--------'                                    '--------'

   Key parts of the JSON example are as follows:

   =============== NOTE: '\' line wrapping per RFC 8792 ================

   {
     "ietf-network:networks": {
       "network": [
         {
           "network-id": "example:campus-topology",
           "node": [
             {
               "node-id": "example:SW-1",
               "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                 "ne-ref": "example:NE-SW1"
               },
               "ietf-network-topology:termination-point": [
                 {
                   "tp-id": "example:TP-SW1-P1",
                   "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                     "ne-ref": "example:NE-SW1",
                     "port-ref": "/nwi:network-inventory/nwi:network-\
   elements/nwi:network-element[ne-id='example:NE-SW1']/nwi:components/\
                               nwi:component[component-id='eth-port-1']"
                   }
                 }
               ]
             },
             {
               "node-id": "example:SW-2",
               "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                 "ne-ref": "example:NE-SW2"
               },
               "ietf-network-topology:termination-point": [
                 {
                   "tp-id": "example:TP-SW2-P1",
                   "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                     "ne-ref": "example:NE-SW2",
                     "port-ref": "/nwi:network-inventory/nwi:network-\



Wu, et al.              Expires 20 November 2026               [Page 18]

Internet-Draft         Inventory Topology Mapping               May 2026


   elements/nwi:network-element[ne-id='NE-SW2']/nwi:components/nwi:\
                                   component[component-id='eth-port-1']"
                   }
                 }
               ]
             }
           ],
           "ietf-network-topology:link": [
             {
               "link-id": "example:Link-SW1-SW2",
               "source": {
                 "source-node": "example:SW-1",
                 "source-tp": "example:TP-SW1-P1"
               },
               "destination": {
                 "dest-node": "example:SW-2",
                 "dest-tp": "example:TP-SW2-P1"
               },
               "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                 "link-type": "fiber"
               }
             }
           ]
         }
       ]
     }
   }

Appendix B.  JSON Example of an Multi-fibre Push On (MPO) Breakout-
             Channel Port

   This appendix provides an example of a 400 Gb/s DR4 port that is
   physically implemented as four independent 100 Gb/s lanes (an MPO
   breakout).  The lanes are exposed as breakout-channel entries so that
   the port can later be configured as either a single 400G trunk or
   four 100G breakout interfaces.  The instance data below shows the
   minimal JSON encoding [RFC7951] of the "port-breakout" container for
   this port.












Wu, et al.              Expires 20 November 2026               [Page 19]

Internet-Draft         Inventory Topology Mapping               May 2026


   =============== NOTE: '\' line wrapping per RFC 8792 ================

   {
     "ietf-network-topology:networks": {
       "network": [
         {
           "network-id": "example:underlay-topology-400g",
           "node": [
             {
               "node-id": "example:n1",
               "termination-point": [
                 {
                   "tp-id": "example:400g-1/0/1",
                   "ietf-network-inventory-topology:inventory-mapping-\
                                                          attributes": {
                     "ne-ref": "example:NE-1",
                     "port-ref": "example:port-1"
                   },
                   "ietf-network-inventory-topology:port-breakout": {
                     "breakout-channel": [
                       { "channel-id": 1 },
                       { "channel-id": 2 },
                       { "channel-id": 3 },
                       { "channel-id": 4 }
                     ]
                   }
                 }
               ]
             }
           ]
         }
       ]
     }
   }

Acknowledgments

   The authors wish to thank Italo Busi, Olga Havel, Aihua Guo, Oscar
   Gonzalez de Dios, and many others for their helpful comments and
   suggestions.

Contributors

   Chaode Yu
   Huawei
   Email: yuchaode@huawei.com





Wu, et al.              Expires 20 November 2026               [Page 20]

Internet-Draft         Inventory Topology Mapping               May 2026


Authors' Addresses

   Bo Wu (editor)
   Huawei
   Email: lana.wubo@huawei.com


   Mohamed Boucadair
   Orange
   Email: mohamed.boucadair@orange.com


   Cheng Zhou
   China Mobile
   Email: zhouchengyjy@chinamobile.com


   Qin Wu
   Huawei
   Email: bill.wu@huawei.com































Wu, et al.              Expires 20 November 2026               [Page 21]
